Product Overview
The CABAC CASR35/16 Copper Reducing Link is a compression connector for joining a 35mm² copper conductor to a 16mm² copper conductor. It is used where a conductor size transition is required in an electrical joint, fly lead, cable tail or equipment connection.
The link is suitable for circular and sector stranded copper conductors and is intended for permanent crimped connections. When installed with the correct crimping tool and die set, it provides a reliable electrical path and strong mechanical retention for commercial, industrial and maintenance electrical work.
Key Features
- Connects 35mm² copper conductor to 16mm² copper conductor
- Suitable for circular and sector stranded copper conductors
- Copper construction for reliable conductivity
- Designed for compression crimp installation
- Suitable for reducing joints, fly leads and cable tails
- Compact connector for smaller conductor transitions
Typical Applications
- LV cable reducing joints
- Switchboard and distribution wiring
- Fly leads and cable tails
- Electrical equipment connections
- Commercial and industrial maintenance
Technical Specifications
| Brand |
CABAC |
| Manufacturer Part Number |
CASR35/16 |
| Product Type |
Copper Reducing Link |
| Large Conductor Size |
35mm² |
| Small Conductor Size |
16mm² |
| Conductor Material |
Copper |
| Compatible Conductor Type |
Circular and sector stranded copper conductors |
| Installation Method |
Compression Crimp |
Installation Notes
Prepare both copper conductors correctly, insert each conductor fully into the matching end of the reducing link and crimp with the correct die for each conductor size. Insulate and protect the completed joint to suit the application.
Product details
Copper Reducing Link
The CABAC copper reducing link range are a barrier type, so they can be used in any situation where an impermeable barrier to oils or water is required.
Note: Do not crimp close to the centre barrier or the links may shear.
Standards and Compliance
AS4325 Part 1 Australia; IEC France; GL/DIN/VDE Germany; JIS Japan; BS United Kingdom; UL/NEMA USA
Technical Data
Nominal Conductor (mm2): 35
Conductive material
Copper 99.95% pure
Oxygen content 30 p.p.m. Max.
Tensile strength 200 MPa
Ductile rating 40%
Final metal state - fully annealed
Operating temperature
-55 to 155 deg C
General electrical properties
Total conductivity 99.7% IACS
Total resistivity 1.738 micro-ohm cm
Plating
This product is not supplied plated since limited shelf life is expected
Dimensional specification
Tooling is interchangeable between Cable Accessories, Utilux and Burndy
Manufacturer specifications
| Cable Size Large End (mm2) |
35 |
| Cable Size Small End (mm2) |
16 |
| Lugs and Links - Material |
Copper |
Product details and specifications from CABAC product data.
