Copper Reducing Link 240-150mm²
The CABAC Copper Reducing Link 240-150mm² is designed for joining copper conductors of different cross-sectional sizes using a compression crimping method. It is suitable for reducing joints, fly leads, tails and cable transition points where a 240mm² copper conductor needs to be connected to a 150mm² copper conductor.
Manufactured for electrical trade applications, this reducing link is suitable for circular and sector stranded copper conductors. The connector incorporates an impermeable barrier to help prevent the transfer of oils and water through the joint, supporting long-term connection integrity in demanding LV power installations.
Key Features
- Suits 240mm² to 150mm² copper conductor reduction
- Suitable for circular and sector stranded copper conductors
- Designed for compression crimping
- Used for reducing joints, fly leads and cable tails
- Impermeable barrier for oils and water
- Suitable for heavy-duty electrical and power connectivity work
Typical Applications
- LV cable jointing
- Switchboard and distribution board cable transitions
- Industrial power installations
- Underground cable joints
- Electrical maintenance and cable repair work
Technical Specifications
| Brand |
CABAC |
| Product Type |
Copper reducing link |
| Conductor Size |
240mm² to 150mm² |
| Conductor Material |
Copper |
| Compatible Conductor Form |
Circular and sector stranded copper conductors |
| Installation Method |
Compression crimp |
| Manufacturer Part Number |
CASR240/150 |
Installation Notes
Install using compatible CABAC or industry-standard crimping tools and dies suitable for the conductor size. Always confirm conductor preparation, die selection and crimp sequence before energising the circuit.
Product details
Copper Reducing Link
The CABAC copper reducing link range are a barrier type, so they can be used in any situation where an impermeable barrier to oils or water is required.
Note: Do not crimp close to the centre barrier or the links may shear.
Standards and Compliance
AS4325 Part 1 Australia; IEC France; GL/DIN/VDE Germany; JIS Japan; BS United Kingdom; UL/NEMA USA
Technical Data
Nominal Conductor (mm2): 240
Conductive material
Copper 99.95% pure
Oxygen content 30 p.p.m. Max.
Tensile strength 200 MPa
Ductile rating 40%
Final metal state - fully annealed
Operating temperature
-55 to 155 deg C
General electrical properties
Total conductivity 99.7% IACS
Total resistivity 1.738 micro-ohm cm
Plating
This product is not supplied plated since limited shelf life is expected
Dimensional specification
Tooling is interchangeable between Cable Accessories, Utilux and Burndy
Manufacturer specifications
| Cable Size Large End (mm2) |
240 |
| Cable Size Small End (mm2) |
150 |
| Lugs and Links - Material |
Copper |
Product details and specifications from CABAC product data.
