Copper Reducing Link 185-95mm²
The CABAC Copper Reducing Link 185-95mm² is used to join a 185mm² copper conductor to a 95mm² copper conductor using a compression crimp connection. It is intended for electrical contractors and cable jointers who require a reliable reducing connector for LV power cable transitions.
This reducing link is suitable for circular and sector stranded copper conductors and can be used for reducing joints, fly leads, tails and other cable size transition points. The built-in impermeable barrier helps prevent oils and water from passing through the connector, supporting a clean and dependable joint.
Key Features
- Suits 185mm² to 95mm² copper conductor reduction
- Compatible with circular and sector stranded copper conductors
- Compression crimp installation
- Suitable for reducing joints, fly leads and tails
- Impermeable barrier for oils and water
- Suitable for electrical power connectivity applications
Typical Applications
- LV cable jointing
- Switchboard cable transitions
- Distribution boards
- Industrial electrical maintenance
- Underground cable repair and jointing
Technical Specifications
| Brand |
CABAC |
| Product Type |
Copper reducing link |
| Conductor Size |
185mm² to 95mm² |
| Conductor Material |
Copper |
| Compatible Conductor Form |
Circular and sector stranded copper conductors |
| Installation Method |
Compression crimp |
| Manufacturer Part Number |
CASR185/95 |
Installation Notes
Crimp using the correct tooling and die set for the conductor size. Ensure conductors are correctly stripped, fully inserted and crimped according to accepted electrical trade practice.
Product details
Copper Reducing Link
The CABAC copper reducing link range are a barrier type, so they can be used in any situation where an impermeable barrier to oils or water is required.
Note: Do not crimp close to the centre barrier or the links may shear.
Standards and Compliance
AS4325 Part 1 Australia; IEC France; GL/DIN/VDE Germany; JIS Japan; BS United Kingdom; UL/NEMA USA
Technical Data
Nominal Conductor (mm2): 185
Conductive material
Copper 99.95% pure
Oxygen content 30 p.p.m. Max.
Tensile strength 200 MPa
Ductile rating 40%
Final metal state - fully annealed
Operating temperature
-55 to 155 deg C
General electrical properties
Total conductivity 99.7% IACS
Total resistivity 1.738 micro-ohm cm
Plating
This product is not supplied plated since limited shelf life is expected
Dimensional specification
Tooling is interchangeable between Cable Accessories, Utilux and Burndy
Manufacturer specifications
| Cable Size Large End (mm2) |
185 |
| Cable Size Small End (mm2) |
95 |
| Lugs and Links - Material |
Copper |
Product details and specifications from CABAC product data.
