CABAC CASR300/120 copper reducing link for joining 300mm² copper conductors to 120mm² copper conductors using a compression crimp connection. Suitable for circular and sector stranded copper conductors in reducing joints, fly leads, cable tails, switchboard work and electrical maintenance applications.
Brand: CABAC. Part number: CASR300/120. Product type: copper reducing link. Large conductor size: 300mm². Small conductor size: 120mm². Installation method: compression crimp. Use compatible crimping tools and dies for each conductor size and insulate the completed joint to suit the installation.
Product details
Copper Reducing Link
The CABAC copper reducing link range are a barrier type, so they can be used in any situation where an impermeable barrier to oils or water is required.
Note: Do not crimp close to the centre barrier or the links may shear.
Standards and Compliance
AS4325 Part 1 Australia; IEC France; GL/DIN/VDE Germany; JIS Japan; BS United Kingdom; UL/NEMA USA
Technical Data
Nominal Conductor (mm2): 300
Conductive material
Copper 99.95% pure
Oxygen content 30 p.p.m. Max.
Tensile strength 200 MPa
Ductile rating 40%
Final metal state - fully annealed
Operating temperature
-55 to 155 deg C
General electrical properties
Total conductivity 99.7% IACS
Total resistivity 1.738 micro-ohm cm
Plating
This product is not supplied plated since limited shelf life is expected
Dimensional specification
Tooling is interchangeable between Cable Accessories, Utilux and Burndy
Manufacturer specifications
| Cable Size Large End (mm2) |
300 |
| Cable Size Small End (mm2) |
120 |
| Lugs and Links - Material |
Copper |
Product details and specifications from CABAC product data.