Product Overview
The CABAC CASR25/10 Copper Reducing Link is a compression connector used to join a 25mm² copper conductor to a 10mm² copper conductor. It is suitable for making a permanent copper-to-copper size transition in cable tails, fly leads, switchboards and electrical equipment connections.
This reducing link is suitable for circular and sector stranded copper conductors and is installed using a compression crimp tool with the correct dies for each conductor size. It provides a compact and reliable solution for smaller conductor reduction applications.
Key Features
- Connects 25mm² copper conductor to 10mm² copper conductor
- Suitable for circular and sector stranded copper conductors
- Copper construction for good electrical conductivity
- Designed for compression crimp installation
- Suitable for reducing joints, fly leads and cable tails
- Compact connector for electrical installation work
Typical Applications
- Switchboard and distribution board wiring
- Fly leads and cable tails
- Electrical equipment connections
- LV reducing joints
- Commercial and industrial maintenance
Technical Specifications
| Brand |
CABAC |
| Manufacturer Part Number |
CASR25/10 |
| Product Type |
Copper Reducing Link |
| Large Conductor Size |
25mm² |
| Small Conductor Size |
10mm² |
| Conductor Material |
Copper |
| Compatible Conductor Type |
Circular and sector stranded copper conductors |
| Installation Method |
Compression Crimp |
Installation Notes
Confirm conductor sizes before installation. Fully insert each conductor into the correct side of the reducing link and crimp with the appropriate die. Insulate the completed connection according to the installation requirements.
Product details
Copper Reducing Link
The CABAC copper reducing link range are a barrier type, so they can be used in any situation where an impermeable barrier to oils or water is required.
Note: Do not crimp close to the centre barrier or the links may shear.
Standards and Compliance
AS4325 Part 1 Australia; IEC France; GL/DIN/VDE Germany; JIS Japan; BS United Kingdom; UL/NEMA USA
Technical Data
Nominal Conductor (mm2): 25
Conductive material
Copper 99.95% pure
Oxygen content 30 p.p.m. Max.
Tensile strength 200 MPa
Ductile rating 40%
Final metal state - fully annealed
Operating temperature
-55 to 155 deg C
General electrical properties
Total conductivity 99.7% IACS
Total resistivity 1.738 micro-ohm cm
Plating
This product is not supplied plated since limited shelf life is expected
Dimensional specification
Tooling is interchangeable between Cable Accessories, Utilux and Burndy
Manufacturer specifications
| Cable Size Large End (mm2) |
25 |
| Cable Size Small End (mm2) |
10 |
| Lugs and Links - Material |
Copper |
Product details and specifications from CABAC product data.
