Minute Timer S-Premium 2-Wire 240V 1.7A
Timer product.
Key Features
- 2-wire style
- 240V rating
- 1.7A rating
- CABAC product
Product details
The S-Click HNS416TM is a 2-in-1 lighting timer switch that automatically turns lights off after a pre-determined time. Time delay can be set in minute increments from 1-60 minutes - perfect for areas that are frequently occupied for relatively short periods. Supporting both timer and non-timer functions, this unit also allows for lights to be manually turned off with a quick tap.
CABAC's minute timer switch is ideal for domestic use and can be retrofitted to most installed lights. A blue LED indicates device status and gives an expiry warning within the last 10 seconds before the lights time-out. The timer settings are retained even after loss of power and can be configured to power up on or off after loss of mains power.
Programming your desired off time could not be simpler; a sustained 10 second press of the button enters programming mode. Just tap the button once for each minute of run time you require, up to 60 minutes. Programming mode expires 10 seconds after the last tap, and the unit then commits your settings to memory. If you happen to press the button more than 60 times, the maximum run time of 60 minutes will be stored.
Applications and Compatibility
The HNS416TM is perfect for lighting in areas such as hallways, garages, laundries and wardrobes. All require adequate lighting but are generally not occupied for extended periods. Using a minute timer switch in these areas prevents the excess energy consumption caused by leaving lights on accidently.
S-Premium Timers are a range extension of the successful S-Click Smart Living range and are specifically designed to be compatible with Clipsal Saturn and Saturn Zen wall plates. These push button timers make use of the button already installed in the wall plate, allowing for your newly installed S-Click timer to perfectly match existing installed switches.
Not suitable for fans, motors or iron core ballasts.
Operating Conditions
Operating Voltage: 230 - 240V a.c. 50Hz
Operating Temperature: 0 to +50 degrees Celsius.
Certification Standard: CISPR15, AS/NZS 3100, AS/NZS 60669.2.1
Maximum Load: 400VA
Minimum Load: 10VA
Maximum Current capacity: 1.7A
Terminals: Screw Terminals suit 0.5mm2 to 1.5mm2 stranded (bootlace terminal recommended)
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.
The HNS416TM is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person. For operating instructions and important safety warnings, refer to the product datasheet for more information.
Manufacturer specifications
| Max Current (A) |
1.7 |
| Max Time Out (hrs) |
0.5 |
| Max Load (VA) |
400 |
| Min Load (VA) |
10 |
| Timer Range |
1 ~ 60 minutes |
| Indicator Colour |
Blue |
| Dimmer Compatible |
No |
| Fans Compatible |
No |
| Number of Wires |
2 |
Product details and specifications from CABAC product data.
