Product Overview
The CABAC CASR35/10 Copper Reducing Link is used to join a 35mm² copper conductor to a 10mm² copper conductor with a permanent compression crimp connection. It is suitable for electrical installations where conductors of different sizes need to be transitioned safely and mechanically secured.
This reducing link is suitable for circular and sector stranded copper conductors. It is commonly used for reducing joints, fly leads, tails, switchboard wiring and maintenance repairs where a reliable copper-to-copper connection is required.
Key Features
- Connects 35mm² copper conductor to 10mm² copper conductor
- Suitable for circular and sector stranded copper conductors
- Copper construction for electrical conductivity
- Designed for compression crimping
- Suitable for reducing joints, fly leads and cable tails
- Useful for compact conductor transitions
Typical Applications
- Low voltage cable reducing joints
- Switchboard and panel wiring
- Fly leads and cable tails
- Electrical equipment connections
- Commercial and industrial maintenance
Technical Specifications
| Brand |
CABAC |
| Manufacturer Part Number |
CASR35/10 |
| Product Type |
Copper Reducing Link |
| Large Conductor Size |
35mm² |
| Small Conductor Size |
10mm² |
| Conductor Material |
Copper |
| Compatible Conductor Type |
Circular and sector stranded copper conductors |
| Installation Method |
Compression Crimp |
Installation Notes
Use suitable copper conductors only. Insert each conductor into the correct end of the reducing link and crimp using the appropriate die for each conductor size. Protect and insulate the finished joint according to the installation environment.
Product details
Copper Reducing Link
The CABAC copper reducing link range are a barrier type, so they can be used in any situation where an impermeable barrier to oils or water is required.
Note: Do not crimp close to the centre barrier or the links may shear.
Standards and Compliance
AS4325 Part 1 Australia; IEC France; GL/DIN/VDE Germany; JIS Japan; BS United Kingdom; UL/NEMA USA
Technical Data
Nominal Conductor (mm2): 35
Conductive material
Copper 99.95% pure
Oxygen content 30 p.p.m. Max.
Tensile strength 200 MPa
Ductile rating 40%
Final metal state - fully annealed
Operating temperature
-55 to 155 deg C
General electrical properties
Total conductivity 99.7% IACS
Total resistivity 1.738 micro-ohm cm
Plating
This product is not supplied plated since limited shelf life is expected
Dimensional specification
Tooling is interchangeable between Cable Accessories, Utilux and Burndy
Manufacturer specifications
| Cable Size Large End (mm2) |
35 |
| Cable Size Small End (mm2) |
10 |
| Lugs and Links - Material |
Copper |
Product details and specifications from CABAC product data.
