Product Overview
The CABAC CASR25/6 Copper Reducing Link is a compression connector for joining a 25mm² copper conductor to a 6mm² copper conductor. It is suitable for conductor size transitions in electrical equipment wiring, switchboards, fly leads and cable tail applications where a permanent copper-to-copper crimped joint is required.
This reducing link is suitable for circular and sector stranded copper conductors. It is designed for compression crimp installation using the correct tooling and die set for each conductor size.
Key Features
- Connects 25mm² copper conductor to 6mm² copper conductor
- Suitable for circular and sector stranded copper conductors
- Copper construction for reliable conductivity
- Designed for compression crimping
- Suitable for reducing joints, fly leads and cable tails
- Compact connector for smaller cable transitions
Typical Applications
- Electrical equipment connections
- Switchboard and panel wiring
- Fly leads and cable tails
- LV cable reducing joints
- Commercial and industrial maintenance
Technical Specifications
| Brand |
CABAC |
| Manufacturer Part Number |
CASR25/6 |
| Product Type |
Copper Reducing Link |
| Large Conductor Size |
25mm² |
| Small Conductor Size |
6mm² |
| Conductor Material |
Copper |
| Compatible Conductor Type |
Circular and sector stranded copper conductors |
| Installation Method |
Compression Crimp |
Installation Notes
Use the correct crimping die for each conductor size. Insert the stripped conductors fully into the appropriate ends of the reducing link, complete the crimp and insulate the finished connection to suit the installation environment.
Product details
Copper Reducing Link
The CABAC copper reducing link range are a barrier type, so they can be used in any situation where an impermeable barrier to oils or water is required.
Note: Do not crimp close to the centre barrier or the links may shear.
Standards and Compliance
AS4325 Part 1 Australia; IEC France; GL/DIN/VDE Germany; JIS Japan; BS United Kingdom; UL/NEMA USA
Technical Data
Nominal Conductor (mm2): 25
Conductive material
Copper 99.95% pure
Oxygen content 30 p.p.m. Max.
Tensile strength 200 MPa
Ductile rating 40%
Final metal state - fully annealed
Operating temperature
-55 to 155 deg C
General electrical properties
Total conductivity 99.7% IACS
Total resistivity 1.738 micro-ohm cm
Plating
This product is not supplied plated since limited shelf life is expected
Dimensional specification
Tooling is interchangeable between Cable Accessories, Utilux and Burndy
Manufacturer specifications
| Cable Size Large End (mm2) |
25 |
| Cable Size Small End (mm2) |
6 |
| Lugs and Links - Material |
Copper |
Product details and specifications from CABAC product data.
