Product overview
The SX 75-75 Flat Lid Trunking 45° Inside Lid Bend is a stainless steel fitting for creating a controlled 45° change of direction in flat lid trunking. It is suitable for neat cable routing in commercial, industrial and exposed-service installations.
Key features
- 45° inside lid bend for flat lid trunking runs
- Suits 75 x 75 mm trunking systems
- 304 / V2A / 1.4301 stainless steel construction
- Satin / brushed stainless steel finish
- Helps maintain a professional finish around directional changes
Typical applications
- Commercial electrical fit-outs
- Industrial cable containment
- Plant rooms and service areas
- Food, laboratory and hygiene-sensitive environments
Technical specifications
- Product code: SX 75-75
- Type: Flat lid trunking 45° inside lid bend
- Nominal size: 75 x 75 mm
- Material: 304 stainless steel
- Finish: Satin / brushed stainless steel
Product details
Electrix® Flat Lid Trunking 45° Bends, in 304 - V2A - 1.4301 stainless steel, are used to change direction during an installation. Electrix's fully welded bends offer unrivalled quality & aesthetics.
Fewer coupling screws are required due to Electrix's factory fitted couplings, making the installation easier to install and easier to clean.
This IP4X / IPXXD satin (brushed) finish 45° inside lid bend is compatible with Electrix's 75 x 75 (W x H mm) Flat Lid Trunking System.
Electrix's unique system features a cover plate over each lid joint which reduces the ingress of foreign matter.
UL Listed.
Manufacturer specifications
| Material Type |
Stainless Steel |
| Material Grade |
304 - V2A - 1.4301 |
| Material Finish |
Satin (Brushed) |
| Material Thickness (mm) |
1.2 |
| Size (W x H mm) |
75 x 75 |
| Height (mm) |
75 |
| Width (mm) |
75 |
| Custom Design |
<p>Custom Designs available on request.</p><ul><li>316L - V4A - 1.4404 material</li><li>Custom sizes</li><li>Alternative bend angles (e.g. 15°, 30°)</li><li>Pre-lasered cable entry holes & laser cut apertures</li><li>Multi-compartment</li><li>Lid safety chains</li><li>Lid gasket material</li></ul><a href="/en-gb/stainless-steel-the-custom-shop/" target="_blank">Click here to visit The Custom Shop</a>. |
| Lid Position |
Inside Lid Bend |
| Bend Angle |
45° |
| Unique Cover Plate |
Fitted over every lid joint, reduces the ingress of foreign matter |
| Approvals |
<img alt="UL Listed" src="/Images/SpecAttributes/spec_logo_UL_Listed.png" style="padding: 2px 10px 5px 0px;" /><img alt="IP4X" src="/Images/SpecAttributes/spec_logo_ip4X.png" style="padding: 2px 10px 5px 0px;" /><img alt="CE" src="/Images/SpecAttributes/spec_logo_CE_Marking.png" style="padding: 2px 10px 5px 0px;"/><img alt="UKCA" src="/Images/SpecAttributes/spec_logo_UKCA_Marking.png" style="padding: 2px 10px 5px 0px;"/> |
| UL Information |
Surface Metal Raceway Fittings, File Number: E233530 (60UB) |
| Environmental Rating |
IP4X / IPXXD* |
| For Trunking Size (mm) |
75 x 75 |
| Pack Quantity |
1 |
| Supplied With |
Fitted Couplings, Lid Fastening Turnbuckles, Cover Plates, Nuts & Screws |
| Ideally Suited For |
Food, Dairy, Brewing, Pharmaceutical, Soft Drinks, Architectural companies & many more |
| Compatible With |
Flat Lid Trunking |
| Alternative Material Finish / Grade |
Polished 304 - V2A - 1.4301 |
| Weight (kg) |
0.76 |
| Fine Print |
*The IP rating is only maintained when all apertures are adequately sealed |
Specifications from Electrix International product data.
