SENS004 Infrared Surface Mounted Motion Sensor IP20

SENS004 Infrared Surface Mounted Motion Sensor IP20

The SENS004 Infrared Surface Mounted Motion Sensor IP20 is a CLA Lighting sensor from the SENS004 range, part number SENS004.

Features and specifications are below. For trade or project quantities, contact DZ Electrical Products for a quote.

Key Features

• Input voltage: 220-240V 50/60Hz
• Suitable for use with LED
• 3 wired
• UV resistant
• Surface mounted
• Large detection range
• Housing: PC
• Detection range: 360°
• Detection distance: 6m max(<24°C)
• Detection motion speed: 0.6-1.5m/s
• Rated load: 2000W HAL/ 1000W CFL/ 1000W LED (If lamp higher than 60W is used the distance between lamp & sensor should be a minimum of 60cm)
• Time delay: min.10sec±3sec; max.15min±2min
• Ambient light: <3-2000lux (adjustable)
• Installation height: 2.2-4m
• IP rating: IP20

Specifications

Important Notes

• Must be installed by a licenced electrician (Installation instructions sheet provided in each product box).

Delivery: free on orders of $150 and over (inc. GST); $15 flat rate below that; express $30. Orders are packed and shipped within 1–2 business days, with tracking. Bulky items (cable drums, conduit, enclosures) and anything over 1.2 m long may attract an additional freight charge, shown at checkout. No PO boxes.

Returns: unused products can be returned within 14 days for a full credit. Email us first for return instructions.

Products are covered by their manufacturer’s warranty, valid within Australia. Warranty claims are replacement-only: a one-for-one replacement of the faulty product. Accessories such as batteries are not covered. Outside the 14-day return period, freight for warranty returns is at the buyer’s expense.