Copper Reducing Link 16-10mm²
The CABAC Copper Reducing Link 16-10mm² is a compression crimp connector for joining a 16mm² copper conductor to a 10mm² copper conductor. It is used where a smaller copper conductor needs to be transitioned from a larger cable while maintaining a secure and low-resistance electrical connection.
Suitable for circular and sector stranded copper conductors, this reducing link is commonly used in reducing joints, fly leads, cable tails, switchboards, control panels and general LV electrical installations. An impermeable barrier helps resist oil and water movement through the joint.
Key Features
- 16mm² to 10mm² copper conductor reduction
- Suitable for circular and sector stranded copper conductors
- Compression crimp connection
- Used for reducing joints, fly leads and tails
- Impermeable barrier for oils and water
- Suitable for electrical trade installation work
Technical Specifications
| Brand |
CABAC |
| Product Type |
Copper reducing link |
| Conductor Size |
16mm² to 10mm² |
| Conductor Material |
Copper |
| Compatible Conductors |
Circular and sector stranded copper |
| Installation Method |
Compression crimp |
| Part Number |
CASR16/10 |
Installation Notes
Use correctly sized crimp dies and compatible crimping tools. Ensure the conductor is prepared correctly and fully inserted before compression.
Product details
Copper Reducing Link
The CABAC copper reducing link range are a barrier type, so they can be used in any situation where an impermeable barrier to oils or water is required.
Note: Do not crimp close to the centre barrier or the links may shear.
Standards and Compliance
AS4325 Part 1 Australia; IEC France; GL/DIN/VDE Germany; JIS Japan; BS United Kingdom; UL/NEMA USA
Technical Data
Nominal Conductor (mm2): 16
Conductive material
Copper 99.95% pure
Oxygen content 30 p.p.m. Max.
Tensile strength 200 MPa
Ductile rating 40%
Final metal state - fully annealed
Operating temperature
-55 to 155 deg C
General electrical properties
Total conductivity 99.7% IACS
Total resistivity 1.738 micro-ohm cm
Plating
This product is not supplied plated since limited shelf life is expected
Dimensional specification
Tooling is interchangeable between Cable Accessories, Utilux and Burndy
Manufacturer specifications
| Cable Size Large End (mm2) |
16 |
| Cable Size Small End (mm2) |
10 |
| Lugs and Links - Material |
Copper |
Product details and specifications from CABAC product data.
